Quick answer

Yes, reverse osmosis can remove PFAS. The Minnesota Department of Health says filters with reverse osmosis membranes or activated carbon have been shown to remove PFAS. RO works best at one tap, for drinking and cooking. Choose a certified system, test your water, and keep up with filter changes. Water softeners and boiling do not help.

 

PFAS are often called forever chemicals, because they break down very slowly and stay in the environment for a long time. They have been found in water supplies across the United States, and Minnesota has dealt with them for years. If you live in the East Metro, you have probably heard about them more than most.

So it is natural to ask a simple question. If PFAS are in my water, will a reverse osmosis system get them out? The short answer is yes, but the details matter. Here is what the Minnesota Department of Health says, what that means for your home, and what to look for before you buy. McKay’s Company has been treating Twin Cities water since 1927, and you can read more about us.

What are PFAS?

PFAS stands for per- and polyfluoroalkyl substances. It is a large family of man-made chemicals that has been used for decades in products that resist heat, water and grease. They can end up in the ground and in groundwater, and from there in private wells and some public water supplies.

PFAS are not minerals. They are not part of water hardness, and you cannot see, taste or smell them in your water. The only way to know if they are in your water is to test it. That one fact shapes everything else in this guide.

Does reverse osmosis remove PFAS?

Yes. The Minnesota Department of Health says that “filters containing activated carbon or reverse osmosis membranes have been shown to be effective at removing PFAS.” Reverse osmosis PFAS removal works like this: the system pushes water through a membrane with extremely tiny pores. Most dissolved contaminants stay behind on the membrane and go down the drain, and cleaner water comes out the other side.

That is why reverse osmosis is such a popular choice for drinking water. It handles a wide range of contaminants, not just PFAS. But there is an important point about where to use it.

Why RO belongs at one tap, not the whole house

The Minnesota Department of Health describes reverse osmosis as more practical at the point of use than at the point of entry. In plain English, that means one tap, not the whole house. An RO system at the kitchen sink treats the water you drink and cook with. That is the water that matters most for exposure, and a small system can do the job well.

Running every shower, toilet and washing machine through RO would need a very large system and would waste a lot of water, so it is not the usual approach. Our drinking water systems are built for the kitchen tap. You can look at the 5 stage, 4 stage and 3 stage Pentair FreshPoint models.

What about treating the whole house?

Some people want PFAS treatment at every tap, for example when they are on a private well, or when they have a baby at home or are concerned about bathing and cooking water. The Minnesota Department of Health notes that activated carbon filters are also effective. A whole house system built around carbon or other media is the usual choice for whole house treatment, not RO.

We cover this on our page for the Enpress Pioneer whole house PFAS and lead filter. A whole house filter and a kitchen RO system are often used together, with the filter handling the whole house and the RO tap giving an extra step for drinking water.

What does NOT remove PFAS

This part surprises many people. According to the Minnesota Department of Health, common home systems such as water softeners or iron filtration systems are not likely to remove PFAS. Boiling water will not remove PFAS either. The department also says that ion exchange resin systems may remove PFAS, but you should make sure any system you choose meets the certification standards.

  • Water softeners: not likely to remove PFAS. They are for hardness.
  • Iron filters: not likely to remove PFAS. They are for iron.
  • Boiling: does not remove PFAS.
  • Basic pitcher or faucet filters: results depend on the product. Look for the certification, not the marketing.

If you already have a softener, that is fine for hard water. It just will not make your water PFAS free. If PFAS are your worry, add a system that is designed to remove them.

How to choose a PFAS water filter you can trust

Look for certification

The Minnesota Department of Health advises looking for products certified to NSF/ANSI 53 for filters or NSF/ANSI 58 for reverse osmosis. Ask for the certification sheet and check what the system is actually certified for. A label that only says “removes contaminants” is not enough.

Know the limits of today’s certification

The department is honest about this. It says the current certification standards for PFAS filters do not yet show that a filter will remove PFAS down to the levels the EPA has now set. That does not mean RO and carbon filters do not work. It means a buyer should ask questions, test the water, and not rely on a claim alone.

Test your water before and after

Testing tells you whether you have a PFAS problem at all, and it tells you whether your system is working. Use an accredited lab, and test the water that comes out of the filtered tap as well as the raw water. The Minnesota Department of Health lists accredited labs on its website.

Plan for upkeep

The department says all water treatment units need regular maintenance to work properly, and it advises following the maker’s recommendations. A filter or membrane that is past its life can stop working well, and you may not notice, because PFAS have no taste or smell. Put your filter changes on the calendar.

Who should pay closest attention in Minnesota?

PFAS have been found in parts of the East Metro, including areas in Washington County where McKay’s works every day. Private wells in affected areas deserve the most attention, because nobody tests a private well for you. Public water systems test and report, so city water customers can check their utility’s annual water quality report.

Not sure whether you are on a private well or on city water? Our page on city water versus well water explains how to tell, and what each type of water usually needs.

A simple plan

Here is a simple plan to remove PFAS from drinking water at home.

  • Find out what is in your water. Check your city report, or test your private well with an accredited lab.
  • Choose the right place to treat. Kitchen RO for drinking and cooking. Add whole house treatment if your test results or your situation call for it.
  • Buy a certified system. Ask for NSF/ANSI 53 or 58 documents for the exact model.
  • Test again after installing. Confirm that the filtered water is cleaner.
  • Keep up the maintenance. Change filters and membranes on schedule.

One more note. PFAS rules and guidance are changing. The levels the EPA has set, and the timelines for utilities to meet them, have been under review. Check the Minnesota Department of Health website for the newest advice instead of relying on a blog post, including ours.

Frequently asked questions

Does reverse osmosis remove PFAS?

Yes. The Minnesota Department of Health says filters containing reverse osmosis membranes or activated carbon have been shown to be effective at removing PFAS. RO is most practical at a single tap for drinking and cooking. Choose a certified system and replace its filters on schedule.

Will a water softener remove PFAS?

No. The Minnesota Department of Health says common home systems such as water softeners and iron filters are not likely to remove PFAS. A softener is for hardness. If PFAS are a concern, add a system designed to remove them, such as reverse osmosis or carbon.

Does boiling water remove PFAS?

No. The Minnesota Department of Health states that boiling water will not remove PFAS. Boiling can make them more concentrated as water evaporates. Use a certified filter or reverse osmosis system for drinking and cooking water instead.

Should I use reverse osmosis or a whole house filter for PFAS?

They do different jobs. RO at the kitchen tap treats the water you drink and cook with. A whole house carbon system treats every tap. Many homes with a PFAS concern use both. Your test results and household needs should guide the choice.

What certification should a PFAS filter have?

The Minnesota Department of Health advises looking for NSF/ANSI 53 for filters or NSF/ANSI 58 for reverse osmosis. It also notes that current standards do not yet show removal down to the EPA levels, so testing your filtered water is a smart extra step.

How do I know if PFAS are in my water?

You cannot tell by taste, smell or look. City water customers can read their utility’s annual water quality report. Private well owners should test with an accredited lab. Testing is the only way to know, and it also shows whether your filter is working.

Sources and how we checked

We opened each source on November 16, 2026. Guidance and local numbers can change, so check the original page for the newest version.

 

Worried about PFAS in your water?

Start with a test, then choose the right system. Talk to McKay’s Company about RO for your kitchen tap, whole house treatment, or both. We will tell you what your water needs and what it does not.