Quick answer

Minneapolis and St. Paul tap water is moderately hard. The latest city reports show about 5 to 6 grains per gallon, which is roughly 90 to 100 mg/L. Cities that pump water from wells, such as Cottage Grove, can be much harder. The only number that counts for your home is your own city report or a tap test.

 

If you have ever scrubbed white spots off a glass shower door, you have probably wondered the same thing as many Twin Cities homeowners: is my water really that hard? Online, the answers are all over the place. Some pages say Minneapolis water measures 7.8 grains per gallon. Others say 16 or even 17. The cities test their own water every month and publish the results, and those official numbers tell a calmer story.

In this guide we use those official reports. We explain what the numbers mean in plain English, show how Minneapolis, St. Paul and the East Metro compare, and help you find the exact number for your own home. McKay’s Company has served Twin Cities homes since 1927 (you can read our story), so we would rather you know your real water hardness before you spend a dollar on any equipment.

Twin Cities water hardness at a glance

Here are the latest figures we could confirm from official sources. Hardness changes a little from month to month, so treat each number as a snapshot.

  • Minneapolis: 5.4 grains per gallon (93 mg/L) in June 2026 and 5.8 (100 mg/L) in January 2026. That is moderately hard. The source is the Minneapolis Water Works monthly water analysis.
  • St. Paul: 5.67 grains per gallon (97 mg/L) in August 2026. That is moderately hard. The source is the Saint Paul Regional Water Services monthly mineral report.
  • Woodbury, Cottage Grove and other East Metro cities with wells: there is no single number. Check your city’s annual water quality report. Public datasets built from utility data place Cottage Grove in the very hard range, so these homes are often hard to very hard.

What do grains per gallon and mg/L mean?

Water hardness is the amount of dissolved calcium and magnesium in your water. Water picks up these minerals as it moves through rock and soil. They are not a safety problem, but they leave scale and spots behind.

You will see hardness written in two ways. Grains per gallon is common in the water softener world. Milligrams per liter (mg/L), also written as parts per million, is what most city labs report. One grain per gallon equals 17.1 mg/L, so you can convert between them easily.

The U.S. Geological Survey scale is the one most people use to label the result:

  • Soft: 0 to 60 mg/L, or 0 to 3.5 grains per gallon.
  • Moderately hard: 60 to 120 mg/L, or 3.5 to 7 grains per gallon.
  • Hard: 120 to 180 mg/L, or 7 to 10.5 grains per gallon.
  • Very hard: over 180 mg/L, or over 10.5 grains per gallon.

How hard is Minneapolis water?

Minneapolis Water Works treats river water and publishes a full lab analysis every month. In the June 2026 report, total hardness was 5.4 grains per gallon, or 93 mg/L. In the January 2026 report it was 5.8 grains per gallon, or 100 mg/L. Reports from 2023 to 2025 that we checked landed in the same band, between about 5.1 and 5.6.

That puts Minneapolis in the moderately hard range. It is higher than very soft cities, but well below the 7 grain line where many people start to think about a softener.

Chloramine is a separate issue

The same June 2026 report lists a chloramine residual of 3.9 ppm. Chloramine is the disinfectant the city adds to keep water safe on its trip to your tap. It is not part of hardness, and a water softener does not remove it. If your main complaint is taste or smell, a whole house catalytic carbon filter is the equipment designed for chloramine and chlorine.

How hard is St. Paul water?

Saint Paul Regional Water Services also posts a monthly mineral report. The August 2026 report shows total hardness of 97 mg/L, which is 5.67 grains per gallon. Older reports we checked, from 2018 and 2021, were a little lower at about 4.6 to 4.7. Across those reports, St. Paul has stayed in a narrow band.

So St. Paul and Minneapolis are close cousins when it comes to hardness. Both are moderately hard. Some nearby suburbs buy water from the same utility, so check which utility sends your bill before you assume the same number.

How hard is East Metro water in Woodbury, Cottage Grove and Newport?

The East Metro is a different story. Cities such as Woodbury and Cottage Grove pump their water from underground wells. Groundwater moves slowly through rock and soaks up more minerals along the way, so well water is usually harder than river water.

Public datasets that gather utility reports place Cottage Grove in the very hard range, above 250 mg/L. That is roughly three times harder than Minneapolis. Please treat that as a strong hint rather than a number to size equipment on. Your own city’s annual water quality report is the number to trust, and a tap test is the best double check.

McKay’s is based in Newport, so we see East Metro water every week. If you are not sure whether you are on city water or a private well, our page on city water vs well water explains the difference and the problems that come with each.

Why do some websites show 16 or 17 grains for Minneapolis?

While researching this guide we found pages that list three different hardness numbers for Minneapolis: 7.8, 16.2 and 17.2 grains per gallon. The city’s own 2026 lab results are 5.4 and 5.8. We cannot tell why other pages differ. Old data, state or county averages, and plain mistakes are all possible.

Here is the practical lesson. When you size a water softener, never use a number from a general website. Use the figure from your utility report or a test of your own tap. An oversized system costs more to buy and uses more salt than your water needs.

Do you need a water softener at 5 to 6 grains?

The Minnesota Department of Health says softening is optional and that a softener might be needed above 7 grains per gallon (120 mg/L). Minneapolis and St. Paul sit below that line, so many homes there are fine without one.

Some people still choose to soften moderately hard water because they dislike spots on glasses, soap scum on the shower, or stiff towels. That is a comfort decision, and it is a fair one. Well water homes with higher numbers are a different case. Use this quick guide as a starting point:

  • Under 3.5 grains (soft): little or no scale. No treatment is needed for hardness.
  • 3.5 to 7 grains (moderately hard): some spots and soap scum, but most homes manage fine. A softener is optional and mostly a comfort choice.
  • 7 to 10.5 grains (hard): visible scale on fixtures and in water heaters. A water softener is usually worth considering.
  • Over 10.5 grains (very hard): heavy scale and more wear on appliances. A properly sized softener is usually the right fix, and it is smart to test for iron too.

If you do decide to buy one, size it to your measured hardness and household water use, not to a guess. Our water softener page shows the series we build, and our FB Series softener page lists capacities from 24,000 to 75,000 grains.

Signs of hard water in your home

You do not need a lab to spot the early signs. Look for these:

  • White, crusty buildup around faucets and shower heads.
  • Spots on dishes and glasses that return even after a rinse aid.
  • Soap scum on shower doors and less lather from soap and shampoo.
  • Stiff laundry that feels rough after drying.
  • Scale inside kettles and water heaters, sometimes with a popping sound.

These signs show up at moderate hardness too, just more slowly. A test tells you whether they are caused by hardness or something else, such as iron in well water.

How to find your exact water hardness

  • Check your utility. Look up your city’s monthly mineral report or annual water quality report. Minnesota Department of Health also advises people on community water systems to ask their water system directly.
  • Test your tap. A hardness test strip or drop kit gives a quick estimate. For a precise result, use an accredited lab. Test a cold tap that is not on a softener.
  • Ask a local expert. McKay’s Company can test your water and explain the result in plain language. Ask about water testing when you get in touch.

A note on salt and Minnesota lakes

Softeners use salt, and that salt ends up in wastewater. The Minnesota Department of Health warns that chloride is a growing problem for Minnesota lakes and streams. Its advice is simple: soften only the water that needs it, set the softener to your true hardness, and consider potassium chloride. Knowing your real number helps you do all three.

Hardness is not the same as water safety

Hard water is a mineral issue, not a health rating. A softener is not designed to remove contaminants such as lead or PFAS. If drinking water quality is your concern, look at filtration instead. Our reverse osmosis drinking water systems and the Enpress Pioneer whole house filter are built for those jobs, and a water test is the right first step.

Frequently asked questions

How hard is Minneapolis water?

Minneapolis tap water is moderately hard. City lab reports show 5.4 grains per gallon (93 mg/L) in June 2026 and 5.8 grains per gallon (100 mg/L) in January 2026. Over the last few years the monthly figure has stayed between about 5.1 and 5.8.

How hard is St. Paul water?

St. Paul water is also moderately hard. The Saint Paul Regional Water Services report for August 2026 shows 97 mg/L, which is 5.67 grains per gallon. Older reports we checked from 2018 and 2021 were slightly lower, around 4.6 to 4.7.

Is Minnesota water hard?

It depends on the source. River water used by Minneapolis and St. Paul is moderately hard. Groundwater from wells is usually harder, and some East Metro and rural areas fall in the very hard range. Check your own city report or test your tap.

Do I need a water softener in Minneapolis or St. Paul?

Not always. The Minnesota Department of Health says a softener might be needed above 7 grains per gallon (120 mg/L). Minneapolis and St. Paul are below that line, so many homes do fine without one. It becomes a personal choice based on spots, soap scum and comfort.

What is a good water hardness level?

Water under 3.5 grains per gallon is soft. From 3.5 to 7 it is moderately hard, which most homes handle without treatment. Above 7 it is hard, and above 10.5 it is very hard. Scale, spots and soap scum increase as the number goes up.

How can I test my water hardness at home?

Use a hardness test strip or drop test kit from a hardware store and compare the result with your utility report. For a precise number, use an accredited lab or ask a local water treatment company to test your water. Test a cold tap that has not been softened.

Sources and how we checked

We checked each figure against the original city or state document on November 16, 2026. Hardness changes with the season, so we recommend you read the newest report from your own utility.

 

Not sure what your number is?

Start with your utility report, then confirm it with a tap test. If you want a second opinion in plain language, get in touch with McKay’s Company. We will help you decide whether you need a softener at all, and we will tell you if you do not.